View In:
ArcGIS JavaScript
ArcGIS Online Map Viewer
Service Description: This map is designated as Final.
Land-Use Data Quality Control
Every published digital survey is designated as either ‘Final’, or ‘Provisional’, depending upon its status in a peer review process. Final surveys are peer reviewed with extensive quality control methods to confirm that field attributes reflect the most detailed and specific land-use classification available, following the standard DWR Land Use Legend specific to the survey year. Data sets are considered ‘final’ following the reconciliation of peer review comments and confirmation by the originating Regional Office. During final review, individual polygons are evaluated using a combination of aerial photointerpretation, satellite image multi-spectral data and time series analysis, comparison with other sources of land use data, and general knowledge of land use patterns at the local level.Provisional data sets have been reviewed for conformance with DWR’s published data record format, and for general agreement with other sources of land use trends. Comments based on peer review findings may not be reconciled, and no significant edits or changes are made to the original survey data.
The 2004 Butte County land use survey data set was developed by DWR through its Division of Planning and Local Assistance (DPLA). The data was gathered using aerial photography and extensive field visits. The land use boundaries and attributes were digitized and the resultant data went through standard quality control procedures before finalizing. The land uses that were gathered were detailed agricultural land uses, and lesser detailed urban and native vegetation land uses. The data was gathered and digitized by staff of DWR’s Northern District (ND). Quality control procedures were performed jointly by staff at DWR’s DPLA headquarters and ND, under the supervision of Tito Cervantes, Senior Land and Water Use Scientist. This data was developed to aid DWR’s ongoing efforts to monitor land use for the main purpose of determining current and projected water uses. The associated data are considered DWR enterprise GIS data, which meet all appropriate requirements of the DWR Spatial Data Standards, specifically the DWR Spatial Data Standards version 2.1, dated March 9, 2016. DWR makes no warranties or guarantees - either expressed or implied - as to the completeness, accuracy, or correctness of the data. DWR neither accepts nor assumes liability arising from or for any incorrect, incomplete, or misleading subject data. Comments, problems, improvements, updates, or suggestions should be forwarded to gis@water.ca.gov. This data represents a land use survey of Butte County conducted by DWR, Northern District Office staff, under the leadership of Tito Cervantes, Senior Land and Water Use Supervisor. The field work for this survey was conducted during the summer of 2004. ND staff physically visited each delineated field, noting the crops grown at each location. Field survey boundary data was developed using: 1. The aerial photography used for this survey was taken in June of 2004. 9”x9” color photographs were generated from an altitude of about 6,000 feet above ground to produce a 1:24,000 scale photo. 2. The 9”x9” photos were taken to the field and virtually all the areas were visited to positively identify the land use. Site visits occurred July through September 2004. Land use codes were hand written on the photos. 3. Using AUTOCAD, the land use boundaries were digitized from USGS Digital Orthophoto Quarter Quadrangles (DOQQs) and attributes were entered from the field photos (using a standardized digitizing process). 4. After quality control/assurance procedures were completed on each file (DWG), the data was finalized. 5. The linework and attributes from each DWG quad file were brought into ARCINFO and both quad and survey wide coverages were created, and underwent quality checks. The survey wide coverage was then converted to a shapefile using ARCVIEW. The primary focus of this land use survey is mapping agricultural fields. Urban residences and other urban areas were delineated using aerial photo interpretation. Some urban areas may have been missed, especially in forested areas. Before final processing, standard quality control procedures were performed jointly by staff at DWR's Northern District, and at DPLA headquarters under the leadership of Jean Woods, Senior Land and Water Use Supervisor. After quality control procedures were completed, the data was finalized. The positional accuracy of the digital line work, which is based upon the 9' x 9' color photos, is approximately 23 meters. The land use attribute accuracy for agricultural fields is high, because almost every delineated field was visited by a surveyor. The accuracy is 95 percent because some errors may have occurred. Possible sources of attribute errors are: a) Human error in the identification of crop types, b) Data entry errors.
All Layers and Tables
Has Versioned Data: false
MaxRecordCount: 1000
Supported Query Formats: JSON
Supports Query Data Elements: true
Layers:
Description: This map is designated as Final. Land-Use Data Quality ControlEvery published digital survey is designated as either ‘Final’, or ‘Provisional’, depending upon its status in a peer review process. Final surveys are peer reviewed with extensive quality control methods to confirm that field attributes reflect the most detailed and specific land-use classification available, following the standard DWR Land Use Legend specific to the survey year. Data sets are considered ‘final’ following the reconciliation of peer review comments and confirmation by the originating Regional Office. During final review, individual polygons are evaluated using a combination of aerial photointerpretation, satellite image multi-spectral data and time series analysis, comparison with other sources of land use data, and general knowledge of land use patterns at the local level.Provisional data sets have been reviewed for conformance with DWR’s published data record format, and for general agreement with other sources of land use trends. Comments based on peer review findings may not be reconciled, and no significant edits or changes are made to the original survey data.The 2004 Butte County land use survey data set was developed by DWR through its Division of Planning and Local Assistance (DPLA). The data was gathered using aerial photography and extensive field visits. The land use boundaries and attributes were digitized and the resultant data went through standard quality control procedures before finalizing. The land uses that were gathered were detailed agricultural land uses, and lesser detailed urban and native vegetation land uses. The data was gathered and digitized by staff of DWR’s Northern District (ND). Quality control procedures were performed jointly by staff at DWR’s DPLA headquarters and ND, under the supervision of Tito Cervantes, Senior Land and Water Use Scientist. This data was developed to aid DWR’s ongoing efforts to monitor land use for the main purpose of determining current and projected water uses. The associated data are considered DWR enterprise GIS data, which meet all appropriate requirements of the DWR Spatial Data Standards, specifically the DWR Spatial Data Standards version 2.1, dated March 9, 2016. DWR makes no warranties or guarantees - either expressed or implied - as to the completeness, accuracy, or correctness of the data. DWR neither accepts nor assumes liability arising from or for any incorrect, incomplete, or misleading subject data. Comments, problems, improvements, updates, or suggestions should be forwarded to gis@water.ca.gov. This data represents a land use survey of Butte County conducted by DWR, Northern District Office staff, under the leadership of Tito Cervantes, Senior Land and Water Use Supervisor. The field work for this survey was conducted during the summer of 2004. ND staff physically visited each delineated field, noting the crops grown at each location. Field survey boundary data was developed using: 1. The aerial photography used for this survey was taken in June of 2004. 9”x9” color photographs were generated from an altitude of about 6,000 feet above ground to produce a 1:24,000 scale photo. 2. The 9”x9” photos were taken to the field and virtually all the areas were visited to positively identify the land use. Site visits occurred July through September 2004. Land use codes were hand written on the photos. 3. Using AUTOCAD, the land use boundaries were digitized from USGS Digital Orthophoto Quarter Quadrangles (DOQQs) and attributes were entered from the field photos (using a standardized digitizing process). 4. After quality control/assurance procedures were completed on each file (DWG), the data was finalized. 5. The linework and attributes from each DWG quad file were brought into ARCINFO and both quad and survey wide coverages were created, and underwent quality checks. The survey wide coverage was then converted to a shapefile using ARCVIEW. The primary focus of this land use survey is mapping agricultural fields. Urban residences and other urban areas were delineated using aerial photo interpretation. Some urban areas may have been missed, especially in forested areas. Before final processing, standard quality control procedures were performed jointly by staff at DWR's Northern District, and at DPLA headquarters under the leadership of Jean Woods, Senior Land and Water Use Supervisor. After quality control procedures were completed, the data was finalized. The positional accuracy of the digital line work, which is based upon the 9' x 9' color photos, is approximately 23 meters. The land use attribute accuracy for agricultural fields is high, because almost every delineated field was visited by a surveyor. The accuracy is 95 percent because some errors may have occurred. Possible sources of attribute errors are: a) Human error in the identification of crop types, b) Data entry errors.
Copyright Text: DWR, DPLA, Northern District, Contact: gis@water.ca.gov
Spatial Reference:
102100
(3857)
Initial Extent:
XMin: -1.364739859829364E7
YMin: 4757930.6012499975
XMax: -1.3419472922706354E7
YMax: 4894209.355950001
Spatial Reference: 102100
(3857)
Full Extent:
XMin: -1.35886873346E7
YMin: 4764125.090099998
XMax: -1.34781841864E7
YMax: 4888014.8671
Spatial Reference: 102100
(3857)
Units: esriMeters
Document Info:
Title: i15_LandUse_Butte2004
Author:
Comments: This map is designated as Final. Land-Use Data Quality ControlEvery published digital survey is designated as either ‘Final’, or ‘Provisional’, depending upon its status in a peer review process. Final surveys are peer reviewed with extensive quality control methods to confirm that field attributes reflect the most detailed and specific land-use classification available, following the standard DWR Land Use Legend specific to the survey year. Data sets are considered ‘final’ following the reconciliation of peer review comments and confirmation by the originating Regional Office. During final review, individual polygons are evaluated using a combination of aerial photointerpretation, satellite image multi-spectral data and time series analysis, comparison with other sources of land use data, and general knowledge of land use patterns at the local level.Provisional data sets have been reviewed for conformance with DWR’s published data record format, and for general agreement with other sources of land use trends. Comments based on peer review findings may not be reconciled, and no significant edits or changes are made to the original survey data.The 2004 Butte County land use survey data set was developed by DWR through its Division of Planning and Local Assistance (DPLA). The data was gathered using aerial photography and extensive field visits. The land use boundaries and attributes were digitized and the resultant data went through standard quality control procedures before finalizing. The land uses that were gathered were detailed agricultural land uses, and lesser detailed urban and native vegetation land uses. The data was gathered and digitized by staff of DWR’s Northern District (ND). Quality control procedures were performed jointly by staff at DWR’s DPLA headquarters and ND, under the supervision of Tito Cervantes, Senior Land and Water Use Scientist. This data was developed to aid DWR’s ongoing efforts to monitor land use for the main purpose of determining current and projected water uses. The associated data are considered DWR enterprise GIS data, which meet all appropriate requirements of the DWR Spatial Data Standards, specifically the DWR Spatial Data Standards version 2.1, dated March 9, 2016. DWR makes no warranties or guarantees - either expressed or implied - as to the completeness, accuracy, or correctness of the data. DWR neither accepts nor assumes liability arising from or for any incorrect, incomplete, or misleading subject data. Comments, problems, improvements, updates, or suggestions should be forwarded to gis@water.ca.gov. This data represents a land use survey of Butte County conducted by DWR, Northern District Office staff, under the leadership of Tito Cervantes, Senior Land and Water Use Supervisor. The field work for this survey was conducted during the summer of 2004. ND staff physically visited each delineated field, noting the crops grown at each location. Field survey boundary data was developed using: 1. The aerial photography used for this survey was taken in June of 2004. 9”x9” color photographs were generated from an altitude of about 6,000 feet above ground to produce a 1:24,000 scale photo. 2. The 9”x9” photos were taken to the field and virtually all the areas were visited to positively identify the land use. Site visits occurred July through September 2004. Land use codes were hand written on the photos. 3. Using AUTOCAD, the land use boundaries were digitized from USGS Digital Orthophoto Quarter Quadrangles (DOQQs) and attributes were entered from the field photos (using a standardized digitizing process). 4. After quality control/assurance procedures were completed on each file (DWG), the data was finalized. 5. The linework and attributes from each DWG quad file were brought into ARCINFO and both quad and survey wide coverages were created, and underwent quality checks. The survey wide coverage was then converted to a shapefile using ARCVIEW. The primary focus of this land use survey is mapping agricultural fields. Urban residences and other urban areas were delineated using aerial photo interpretation. Some urban areas may have been missed, especially in forested areas. Before final processing, standard quality control procedures were performed jointly by staff at DWR's Northern District, and at DPLA headquarters under the leadership of Jean Woods, Senior Land and Water Use Supervisor. After quality control procedures were completed, the data was finalized. The positional accuracy of the digital line work, which is based upon the 9' x 9' color photos, is approximately 23 meters. The land use attribute accuracy for agricultural fields is high, because almost every delineated field was visited by a surveyor. The accuracy is 95 percent because some errors may have occurred. Possible sources of attribute errors are: a) Human error in the identification of crop types, b) Data entry errors.
Subject: The 2004 Butte County land use survey data set was developed by DWR through its Division of Planning and Local Assistance (DPLA).
Category:
Keywords: Urban,Vineyard,Orthoimagery,Crop,Landsat,Orthorectification,boundaries,farming,Digital imagery,Native vegetation,Land cover,Butte County,Cadastral,Residential,Multispectral analysis,Irrigation,Ground truth,California,Satellite image
AntialiasingMode: null
TextAntialiasingMode: null
Enable Z Defaults: false
Supports ApplyEdits With Global Ids: false
Support True Curves : true
Only Allow TrueCurve Updates By TrueCurveClients : false
Supports Return Service Edits Option : true
Supports Dynamic Layers: false
Child Resources:
Info
Query Data Elements
Relationships
Supported Operations:
Query
Query Contingent Values
QueryDomains
Extract Changes