ArcGIS REST Services Directory
Home > services > Planning > i15_LandUse_Kings1991 (MapServer) > i15_LandUse_Kings1991 API Reference
JSON

Layer: i15_LandUse_Kings1991 (ID: 0)

Name: i15_LandUse_Kings1991

Display Field: BL_X

Type: Feature Layer

Geometry Type: esriGeometryPolygon

Description: <DIV STYLE="text-align:Left;"><DIV><P><SPAN>The 1991 Kings County land use survey data set was developed by DWR through its Division of Planning and Local Assistance (DPLA). The data was gathered using aerial photography and extensive field visits, the land use boundaries and attributes were digitized, and the resultant data went through standard quality control procedures before finalizing. The land uses that were gathered were detailed agricultural land uses, and lesser detailed urban and native vegetation land uses. The data was gathered and digitized by staff of DWR’s San Joaquin District. Quality control procedures were performed jointly by staff at DWR’s DPLA headquarters and San Joaquin District. The finalized data is a countywide shapefile (land use vector data). Important Points about Using this Data Set: 1. The land use boundaries were hand drawn directly on USGS quad maps and then digitized. They were drawn to depict observable areas of the same land use. They were not drawn to represent legal parcel (ownership) boundaries, or meant to be used as parcel boundaries. 2. This survey was a "snapshot" in time. The indicated land use attributes of each delineated area (polygon) were based upon what the surveyor saw in the field at that time, and, to an extent possible, whatever additional information the aerial photography might provide. For example, the surveyor might have seen a cropped field in the photograph, and the field visit showed a field of corn, so the field was given a corn attribute. In another field, the photograph might have shown a crop that was golden in color (indicating grain prior to harvest), and the field visit showed newly planted corn. This field would be given an attribute showing a double crop, grain followed by corn. The DWR land use attribute structure allows for up to three crops per delineated area (polygon). In the cases where there were crops grown before the survey took place, the surveyor may or may not have been able to detect them from the field or the photographs. For crops planted after the survey date, the surveyor could not account for these crops. Thus, although the data is very accurate for that point in time, it may not be an accurate determination of what was grown in the fields for the whole year. If the area being surveyed does have double or multicropping systems, it is likely that there are more crops grown than could be surveyed with a "snapshot". 3. If the data is to be brought into a GIS for analysis of cropped (or planted) acreage, two things must be understood: a. The acreage of each field delineated is the gross area of the field. The amount of actual planted and irrigated acreage will always be less than the gross acreage, because of ditches, farm roads, other roads, farmsteads, etc. Thus, a delineated corn field may have a GIS calculated acreage of 40 acres but will have a smaller cropped (or net) acreage, maybe 38 acres. b. Double and multicropping must be taken into account. A delineated field of 40 acres might have been cropped first with grain, then with corn, and coded as such. To estimate actual cropped acres, the two crops are added together (38 acres of grain and 38 acres of corn) which results in a total of 76 acres of net crop (or planted) acres. 4. Water source and irrigation method information was not collected for this survey. 5. During the transfer of data from the INTERGRAPH system to the AUTOCAD system, some attributes were lost. For those polygons that were attributed with either “D” (double cropped), “I” (intercropped), or "M" (mixed), the second crop has either an asterisk, blank, or zero in the two fields “IRR_TYP2PA” (irrigated or non-irrigated) and “IRR_TYP2PB” (type of irrigation system). There should have been either and “i” or “n” in the “IRR_TYP2PA” field, and a “U” or “*” in the “IRR_TYP2PB” field. 6. Not all land use codes will be represented in the survey.</SPAN></P><P STYLE="font-size:16ptmargin:7 0 7 0;"><SPAN>The associated data are considered DWR enterprise GIS data, which meet all appropriate requirements of the DWR Spatial Data Standards, specifically the DWR Spatial Data Standard version 3.3, dated April 13, 2022. DWR makes no warranties or guarantees - either expressed or implied - as to the completeness, accuracy, or correctness of the data. DWR neither accepts nor assumes liability arising from or for any incorrect, incomplete, or misleading subject data. The official DWR GIS steward for the statewide compilation of this data is Mohammad Mostafavi, who may be contacted at Mohammad.Mostafavi@water.ca.gov. See the CADWR Land User Viewer (gis.water.ca.gov/app/CADWRLandUseViewer) for the most current contact information. Comments, problems, improvements, updates, or suggestions should be forwarded to the official GIS steward as available and appropriate.</SPAN></P></DIV></DIV>

Copyright Text: California Department of Water Resources, Division of Regional Assistance (DRA), South Central Regional Office, Land and Water Use and Conservation Section, and Water Use Efficiency Branch (Sacramento Headquarters).

Default Visibility: true

MaxRecordCount: 2000

Supported Query Formats: JSON, geoJSON, PBF

Min Scale: 0

Max Scale: 0

Supports Advanced Queries: true

Supports Statistics: true

Has Labels: false

Can Modify Layer: true

Can Scale Symbols: false

Use Standardized Queries: true

Supports Datum Transformation: true

Extent:
Drawing Info: Advanced Query Capabilities:
HasZ: false

HasM: false

Has Attachments: false

HTML Popup Type: esriServerHTMLPopupTypeAsHTMLText

Type ID Field: null

Fields:
Supported Operations:   Query   Query Attachments   Query Analytic   Generate Renderer   Return Updates

  Iteminfo   Thumbnail   Metadata