View In:
ArcGIS Online Map Viewer
View Footprint In:
ArcGIS Online Map Viewer
Service Description: This map is designated as Final.
Land-Use Data Quality Control
Every published digital survey is designated as either ‘Final’, or ‘Provisional’, depending upon its status in a peer review process. Final surveys are peer reviewed with extensive quality control methods to confirm that field attributes reflect the most detailed and specific land-use classification available, following the standard DWR Land Use Legendspecific to the survey year. Data sets are considered ‘final’ following the reconciliation of peer review comments and confirmation by the originating Regional Office. During final review, individual polygons are evaluated using a combination of aerial photointerpretation, satellite image multi-spectral data and time series analysis, comparison with other sources of land use data, and general knowledge of land use patterns at the local level. Provisional data sets have been reviewed for conformance with DWR’s published data record format, and for general agreement with other sources of land use trends. Comments based on peer review findings may not be reconciled, and no significant edits or changes are made to the original survey data.
The 2013 Tuolumne County land use survey data was developed by the State of California, Department of Water Resources (DWR) through its Division of Integrated Regional Water Management (DIRWM) and Division of Statewide Integrated Water Management (DSIWM). Land use boundaries were digitized and land use data were gathered by staff of DWR’s North Central Region using extensive field visits and aerial photography. Land use polygons in agricultural areas were mapped in greater detail than areas of urban or native vegetation. Quality control procedures were performed jointly by staff at DWR’s DSIWM headquarters, under the leadership of Jean Woods, and North Central Region, under the supervision of Kim Rosmaier. This data was developed to aid DWR’s ongoing efforts to monitor land use for the main purpose of determining current and projected water uses. The associated data are considered DWR enterprise GIS data, which meet all appropriate requirements of the DWR Spatial Data Standards, specifically the DWR Spatial Data Standards version 2.1, dated March 9, 2016. DWR makes no warranties or guarantees - either expressed or implied - as to the completeness, accuracy, or correctness of the data. DWR neither accepts nor assumes liability arising from or for any incorrect, incomplete, or misleading subject data. Comments, problems, improvements, updates, or suggestions should be forwarded to gis@water.ca.gov. This data represents a land use survey of Tuolumne County conducted by the California Department of Water Resources, North Central Regional Office staff. Land use field boundaries were digitized with ArcGIS 10.0 and 10.2 using 2012 U.S.D.A National Agriculture Imagery Program (NAIP) one-meter imagery as the base. Agricultural fields were delineated by following actual field boundaries instead of using the centerlines of roads to represent the field borders. Field boundaries were reviewed and updated using 2013 Landsat 8 imagery. Field boundaries were not drawn to represent legal parcel (ownership) boundaries, and are not meant to be used as parcel boundaries. The field work for this survey was conducted during June 2013. Images, land use boundaries and ESRI ArcMap software were loaded onto laptop computers that were used as the field data collection tools. Staff took these laptops into the field and virtually all agricultural fields were visited to identify the land use. Global positioning System (GPS) units connected to the laptops were used to confirm the surveyor's location with respect to the fields. Land use codes were digitized in the field using dropdown selections from defined domains. Upon completion of the survey, a Python script was used to convert the data table into the standard land use format. ArcGIS geoprocessing tools and topology rules were used to locate errors for quality control. The primary focus of this land use survey is mapping agricultural fields. Urban residences and other urban areas were delineated using aerial photo interpretation. Some urban areas may have been missed, especially in forested areas. Rural residential land use was delineated by drawing polygons to surround houses and other buildings along with some of the surrounding land. These footprint areas do not represent the entire footprint of urban land. Sources of irrigation water were identified for general areas and occasionally supplemented by information obtained from landowners. Water source information was not collected for each field in the survey, so the water source listed for a specific agricultural field may not be accurate. Before final processing, standard quality control procedures were performed jointly by staff at DWR’s North Central Region, and at DSIWM headquarters under the leadership of Jean Woods. Senior Land and Water Use Supervisor. After quality control procedures were completed, the data was finalized. The positional accuracy of the digital line work, which is based upon the orthorectified NAIP imagery, is approximately 6 meters. The land use attribute accuracy for agricultural fields is high, because almost every delineated field was visited by a surveyor. The accuracy is 95 percent because some errors may have occurred. Possible sources of attribute errors are: a) Human error in the identification of crop types, b) Data entry errors.
false
MaxRecordCount: 1000
Supported Query Formats: JSON
Supports Query Data Elements: true
Layers:
Description: This map is designated as Final.Land-Use Data Quality ControlEvery published digital survey is designated as either ‘Final’, or ‘Provisional’, depending upon its status in a peer review process. Final surveys are peer reviewed with extensive quality control methods to confirm that field attributes reflect the most detailed and specific land-use classification available, following the standard DWR Land Use Legendspecific to the survey year. Data sets are considered ‘final’ following the reconciliation of peer review comments and confirmation by the originating Regional Office. During final review, individual polygons are evaluated using a combination of aerial photointerpretation, satellite image multi-spectral data and time series analysis, comparison with other sources of land use data, and general knowledge of land use patterns at the local level.Provisional data sets have been reviewed for conformance with DWR’s published data record format, and for general agreement with other sources of land use trends. Comments based on peer review findings may not be reconciled, and no significant edits or changes are made to the original survey data.The 2013 Tuolumne County land use survey data was developed by the State of California, Department of Water Resources (DWR) through its Division of Integrated Regional Water Management (DIRWM) and Division of Statewide Integrated Water Management (DSIWM). Land use boundaries were digitized and land use data were gathered by staff of DWR’s North Central Region using extensive field visits and aerial photography. Land use polygons in agricultural areas were mapped in greater detail than areas of urban or native vegetation. Quality control procedures were performed jointly by staff at DWR’s DSIWM headquarters, under the leadership of Jean Woods, and North Central Region, under the supervision of Kim Rosmaier. This data was developed to aid DWR’s ongoing efforts to monitor land use for the main purpose of determining current and projected water uses. The associated data are considered DWR enterprise GIS data, which meet all appropriate requirements of the DWR Spatial Data Standards, specifically the DWR Spatial Data Standards version 2.1, dated March 9, 2016. DWR makes no warranties or guarantees - either expressed or implied - as to the completeness, accuracy, or correctness of the data. DWR neither accepts nor assumes liability arising from or for any incorrect, incomplete, or misleading subject data. Comments, problems, improvements, updates, or suggestions should be forwarded to gis@water.ca.gov. This data represents a land use survey of Tuolumne County conducted by the California Department of Water Resources, North Central Regional Office staff. Land use field boundaries were digitized with ArcGIS 10.0 and 10.2 using 2012 U.S.D.A National Agriculture Imagery Program (NAIP) one-meter imagery as the base. Agricultural fields were delineated by following actual field boundaries instead of using the centerlines of roads to represent the field borders. Field boundaries were reviewed and updated using 2013 Landsat 8 imagery. Field boundaries were not drawn to represent legal parcel (ownership) boundaries, and are not meant to be used as parcel boundaries. The field work for this survey was conducted during June 2013. Images, land use boundaries and ESRI ArcMap software were loaded onto laptop computers that were used as the field data collection tools. Staff took these laptops into the field and virtually all agricultural fields were visited to identify the land use. Global positioning System (GPS) units connected to the laptops were used to confirm the surveyor's location with respect to the fields. Land use codes were digitized in the field using dropdown selections from defined domains. Upon completion of the survey, a Python script was used to convert the data table into the standard land use format. ArcGIS geoprocessing tools and topology rules were used to locate errors for quality control. The primary focus of this land use survey is mapping agricultural fields. Urban residences and other urban areas were delineated using aerial photo interpretation. Some urban areas may have been missed, especially in forested areas. Rural residential land use was delineated by drawing polygons to surround houses and other buildings along with some of the surrounding land. These footprint areas do not represent the entire footprint of urban land. Sources of irrigation water were identified for general areas and occasionally supplemented by information obtained from landowners. Water source information was not collected for each field in the survey, so the water source listed for a specific agricultural field may not be accurate. Before final processing, standard quality control procedures were performed jointly by staff at DWR’s North Central Region, and at DSIWM headquarters under the leadership of Jean Woods. Senior Land and Water Use Supervisor. After quality control procedures were completed, the data was finalized. The positional accuracy of the digital line work, which is based upon the orthorectified NAIP imagery, is approximately 6 meters. The land use attribute accuracy for agricultural fields is high, because almost every delineated field was visited by a surveyor. The accuracy is 95 percent because some errors may have occurred. Possible sources of attribute errors are: a) Human error in the identification of crop types, b) Data entry errors.
Copyright Text: Department of Water Resources, Division of Integrated Regional Water Management, North Central Region Office, Land and Water Use and Conservation Section. Contact: gis@water.ca.gov.
Spatial Reference:
102100
(3857)
Initial Extent:
XMin: -1.350120851380975E7
YMin: 4494155.291174253
XMax: -1.3199064913490256E7
YMax: 4674809.592125738
Spatial Reference: 102100
(3857)
Full Extent:
XMin: -1.3431042096099999E7
YMin: 4527781.415100001
XMax: -1.32692284735E7
YMax: 4641182.018299997
Spatial Reference: 102100
(3857)
Units: esriMeters
Document Info:
Title: i15_LandUse_Tuolumne2013
Author:
Comments: This map is designated as Final.Land-Use Data Quality ControlEvery published digital survey is designated as either ‘Final’, or ‘Provisional’, depending upon its status in a peer review process. Final surveys are peer reviewed with extensive quality control methods to confirm that field attributes reflect the most detailed and specific land-use classification available, following the standard DWR Land Use Legendspecific to the survey year. Data sets are considered ‘final’ following the reconciliation of peer review comments and confirmation by the originating Regional Office. During final review, individual polygons are evaluated using a combination of aerial photointerpretation, satellite image multi-spectral data and time series analysis, comparison with other sources of land use data, and general knowledge of land use patterns at the local level.Provisional data sets have been reviewed for conformance with DWR’s published data record format, and for general agreement with other sources of land use trends. Comments based on peer review findings may not be reconciled, and no significant edits or changes are made to the original survey data.The 2013 Tuolumne County land use survey data was developed by the State of California, Department of Water Resources (DWR) through its Division of Integrated Regional Water Management (DIRWM) and Division of Statewide Integrated Water Management (DSIWM). Land use boundaries were digitized and land use data were gathered by staff of DWR’s North Central Region using extensive field visits and aerial photography. Land use polygons in agricultural areas were mapped in greater detail than areas of urban or native vegetation. Quality control procedures were performed jointly by staff at DWR’s DSIWM headquarters, under the leadership of Jean Woods, and North Central Region, under the supervision of Kim Rosmaier. This data was developed to aid DWR’s ongoing efforts to monitor land use for the main purpose of determining current and projected water uses. The associated data are considered DWR enterprise GIS data, which meet all appropriate requirements of the DWR Spatial Data Standards, specifically the DWR Spatial Data Standards version 2.1, dated March 9, 2016. DWR makes no warranties or guarantees - either expressed or implied - as to the completeness, accuracy, or correctness of the data. DWR neither accepts nor assumes liability arising from or for any incorrect, incomplete, or misleading subject data. Comments, problems, improvements, updates, or suggestions should be forwarded to gis@water.ca.gov. This data represents a land use survey of Tuolumne County conducted by the California Department of Water Resources, North Central Regional Office staff. Land use field boundaries were digitized with ArcGIS 10.0 and 10.2 using 2012 U.S.D.A National Agriculture Imagery Program (NAIP) one-meter imagery as the base. Agricultural fields were delineated by following actual field boundaries instead of using the centerlines of roads to represent the field borders. Field boundaries were reviewed and updated using 2013 Landsat 8 imagery. Field boundaries were not drawn to represent legal parcel (ownership) boundaries, and are not meant to be used as parcel boundaries. The field work for this survey was conducted during June 2013. Images, land use boundaries and ESRI ArcMap software were loaded onto laptop computers that were used as the field data collection tools. Staff took these laptops into the field and virtually all agricultural fields were visited to identify the land use. Global positioning System (GPS) units connected to the laptops were used to confirm the surveyor's location with respect to the fields. Land use codes were digitized in the field using dropdown selections from defined domains. Upon completion of the survey, a Python script was used to convert the data table into the standard land use format. ArcGIS geoprocessing tools and topology rules were used to locate errors for quality control. The primary focus of this land use survey is mapping agricultural fields. Urban residences and other urban areas were delineated using aerial photo interpretation. Some urban areas may have been missed, especially in forested areas. Rural residential land use was delineated by drawing polygons to surround houses and other buildings along with some of the surrounding land. These footprint areas do not represent the entire footprint of urban land. Sources of irrigation water were identified for general areas and occasionally supplemented by information obtained from landowners. Water source information was not collected for each field in the survey, so the water source listed for a specific agricultural field may not be accurate. Before final processing, standard quality control procedures were performed jointly by staff at DWR’s North Central Region, and at DSIWM headquarters under the leadership of Jean Woods. Senior Land and Water Use Supervisor. After quality control procedures were completed, the data was finalized. The positional accuracy of the digital line work, which is based upon the orthorectified NAIP imagery, is approximately 6 meters. The land use attribute accuracy for agricultural fields is high, because almost every delineated field was visited by a surveyor. The accuracy is 95 percent because some errors may have occurred. Possible sources of attribute errors are: a) Human error in the identification of crop types, b) Data entry errors.
Subject: The 2013 Tuolumne County land use survey data was developed by the State of California, Department of Water Resources (DWR).
Category:
Keywords: Agriculture,Native vegetation,Land use,Aerial photography,Landsat,Irrigation,Survey,Vineyard,Orthoimagery,Crop,Survey year 2013,boundaries,Digital imagery,Tuolumne County,Residential,Satellite imagery,California,Raster,Land cover,Cadastral,Global Positioning System (GPS),Multispectral analysis,Imagery,farming,Urban,Vector,Image classification,NDVI,Ground truth,Orthorectification
AntialiasingMode: null
TextAntialiasingMode: null
Enable Z Defaults: false
Supports ApplyEdits With Global Ids: false
Support True Curves : true
Only Allow TrueCurve Updates By TrueCurveClients : false
Supports Return Service Edits Option : true
Supports Dynamic Layers: false
Child Resources:
Info
Query Data Elements
Relationships
Supported Operations:
Query
Query Contingent Values
QueryDomains
Extract Changes