View In:
ArcGIS JavaScript
ArcGIS Online Map Viewer
ArcGIS Earth
ArcMap
ArcGIS Pro
View Footprint In:
ArcGIS Online Map Viewer
Service Description: Detailed center lines of the Sacramento-San Joaquin levee systems, and broken into singular segments of consistent-attribute sets. The use of high-resolution LiDAR, and the products derived from it, allow for levee anatomy to be captured for the surveyed area. The resulting data allows for the levee crown sections to be isolated and collapsed to a centerline, detailing the route of the levee system. This data can further be used for levee maintenance and management, flood modeling and prediction, as well as levee inventories. The data are therefore mostly the structural center lines of the levees, with some minor modifications as warranted.
In the Delta Anatomy Mapping Project, all levee anatomies were delineated using slope grids built from available 2007 Delta LIDAR data points. LIDAR data points were converted to digital elevation models and subsequently into slope grids. Thresholds were identified that capture the levee crown, levee landside, levee waterside, ramps and toe ditches. Visual interpretations of slope thresholds were used in conjunction with heads-up digitizing to maintain smooth boundaries at a scale of 1:550. The delineation thresholds were derived from a combination of mapping scale, slope grid resolution and slope thresholds used for each anatomy classification. All anatomy has gone through internal quality control processes to ensure a minimum accuracy of +/- 3 feet. Anatomy data was further reviewed and tested by DWR for compliance with an interpretive mapping standard of 80% accuracy.Once the levee anatomy was created and accepted, isolation and export of the levee crown was used in conjucture with ET Geowizards to collapse the crown to a singular centerline which details the levee route. This data depicts the levee anatomy at the time of the LiDAR survey (2007) and are only accurate for that time. Users should be aware that temporal changes may have occurred since this data set was created and some parts of this data may no longer represent actual surface conditions. Changes in some linework and attribution were performed by CA DWR Division of Engineering in September, 2018, and current version was posted to DWR GIS Atlas at that time. This data set was produced by joint effort of DWR and Chico State University. Data were originally developed and supplied by the Geographic Information Center at California State University at Chico, under contract to California Department of Water Resources. DWR subsequently modified the linework in a few places along with the attribution for various levee characteristics of interest.
Map Name: Layers
Legend
All Layers and Tables
Dynamic Legend
Dynamic All Layers
Layers:
Description: Detailed center lines of the Sacramento-San Joaquin levee systems, and broken into singular segments of consistent-attribute sets. The use of high-resolution LiDAR, and the products derived from it, allow for levee anatomy to be captured for the surveyed area. The resulting data allows for the levee crown sections to be isolated and collapsed to a centerline, detailing the route of the levee system. This data can further be used for levee maintenance and management, flood modeling and prediction, as well as levee inventories. The data are therefore mostly the structural center lines of the levees, with some minor modifications as warranted.
In the Delta Anatomy Mapping Project, all levee anatomies were delineated using slope grids built from available 2007 Delta LIDAR data points. LIDAR data points were converted to digital elevation models and subsequently into slope grids. Thresholds were identified that capture the levee crown, levee landside, levee waterside, ramps and toe ditches. Visual interpretations of slope thresholds were used in conjunction with heads-up digitizing to maintain smooth boundaries at a scale of 1:550. The delineation thresholds were derived from a combination of mapping scale, slope grid resolution and slope thresholds used for each anatomy classification. All anatomy has gone through internal quality control processes to ensure a minimum accuracy of +/- 3 feet. Anatomy data was further reviewed and tested by DWR for compliance with an interpretive mapping standard of 80% accuracy.Once the levee anatomy was created and accepted, isolation and export of the levee crown was used in conjucture with ET Geowizards to collapse the crown to a singular centerline which details the levee route. This data depicts the levee anatomy at the time of the LiDAR survey (2007) and are only accurate for that time. Users should be aware that temporal changes may have occurred since this data set was created and some parts of this data may no longer represent actual surface conditions. Changes in some linework and attribution were performed by CA DWR Division of Engineering in September, 2018, and current version was posted to DWR GIS Atlas at that time. This data set was produced by joint effort of DWR and Chico State University. Data were originally developed and supplied by the Geographic Information Center at California State University at Chico, under contract to California Department of Water Resources. DWR subsequently modified the linework in a few places along with the attribution for various levee characteristics of interest.
Copyright Text: California Department of Water Resources. Contact: gis@water.ca.gov
Spatial Reference:
102100
(3857)
Single Fused Map Cache: false
Initial Extent:
XMin: -1.3630112990183435E7
YMin: 4542605.499998639
XMax: -1.344668524811656E7
YMax: 4652278.551101361
Spatial Reference: 102100
(3857)
Full Extent:
XMin: -1.35875838096E7
YMin: 4531967.440499999
XMax: -1.34892144287E7
YMax: 4663032.565300003
Spatial Reference: 102100
(3857)
Units: esriMeters
Supported Image Format Types: PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP
Document Info:
Title: i17_Delta_Levees_Centerlines
Author:
Comments: Detailed center lines of the Sacramento-San Joaquin levee systems, and broken into singular segments of consistent-attribute sets. The use of high-resolution LiDAR, and the products derived from it, allow for levee anatomy to be captured for the surveyed area. The resulting data allows for the levee crown sections to be isolated and collapsed to a centerline, detailing the route of the levee system. This data can further be used for levee maintenance and management, flood modeling and prediction, as well as levee inventories. The data are therefore mostly the structural center lines of the levees, with some minor modifications as warranted.
In the Delta Anatomy Mapping Project, all levee anatomies were delineated using slope grids built from available 2007 Delta LIDAR data points. LIDAR data points were converted to digital elevation models and subsequently into slope grids. Thresholds were identified that capture the levee crown, levee landside, levee waterside, ramps and toe ditches. Visual interpretations of slope thresholds were used in conjunction with heads-up digitizing to maintain smooth boundaries at a scale of 1:550. The delineation thresholds were derived from a combination of mapping scale, slope grid resolution and slope thresholds used for each anatomy classification. All anatomy has gone through internal quality control processes to ensure a minimum accuracy of +/- 3 feet. Anatomy data was further reviewed and tested by DWR for compliance with an interpretive mapping standard of 80% accuracy.Once the levee anatomy was created and accepted, isolation and export of the levee crown was used in conjucture with ET Geowizards to collapse the crown to a singular centerline which details the levee route. This data depicts the levee anatomy at the time of the LiDAR survey (2007) and are only accurate for that time. Users should be aware that temporal changes may have occurred since this data set was created and some parts of this data may no longer represent actual surface conditions. Changes in some linework and attribution were performed by CA DWR Division of Engineering in September, 2018, and current version was posted to DWR GIS Atlas at that time. This data set was produced by joint effort of DWR and Chico State University. Data were originally developed and supplied by the Geographic Information Center at California State University at Chico, under contract to California Department of Water Resources. DWR subsequently modified the linework in a few places along with the attribution for various levee characteristics of interest.
Subject: Detailed center lines of the Sacramento-San Joaquin levee systems, and broken into singular segments of consistent-attribute sets.
Category:
Keywords: structure,boundaries,Delta,California 2007 Bare Earth LiDAR,Levee,Levee Anatomy,California,Levee Delta
AntialiasingMode: None
TextAntialiasingMode: Force
Supports Dynamic Layers: true
Resampling: false
MaxRecordCount: 1000
MaxImageHeight: 4096
MaxImageWidth: 4096
Supported Query Formats: JSON, geoJSON, PBF
Supports Query Data Elements: true
Min Scale: 0
Max Scale: 0
Supports Datum Transformation: true
Child Resources:
Info
Dynamic Layer
Supported Operations:
Export Map
Identify
QueryDomains
QueryLegends
Find
Return Updates
Generate KML