| snippet:
|
Primary purpose is to quantify floating and submerged aquatic vegetation in the channel. Data was collected on 12/5/2023 1015-1230 PST
|
| summary:
|
Primary purpose is to quantify floating and submerged aquatic vegetation in the channel. Data was collected on 12/5/2023 1015-1230 PST
|
| accessInformation:
|
Michael Baldwin, P.E., California Department of Water Resources, NCRO |
| thumbnail:
|
thumbnail/thumbnail.png |
| typeKeywords:
|
["Data","Service","Image Service","ArcGIS Server"] |
| description:
|
Purpose:
Primary purpose is to quantify floating and submerged aquatic vegetation in the channel.
Survey Date and Time:
Data was collected on 12/5/2023 1015-1230 PST
Imagery Acquisition:
The imagery was collected using a DJI Mavic 2 Pro UAS, operating at 250’ above ground level, along one single flight line following the center line of Paradise Cut from the weir on the San Joaquin River to the confluence with Old River. The field collection was controlled by a DJI Smart Controller running the DJI Pilot app.
Software Processing:
Images were imported into ArcGIS Pro 3.1 using the Ortho Mapping workspace tool, block adjusted, and an Orthomosaic was generated. No external control points were used for this project.
Adjustment summary from ArcGIS Pro:
Number of Adjusted Images 2725
Number of Tie Points 17513992
Number of Solution Points 5648711
Mean Reprojection Error / Sigma Naught (pixel) 0.34 / 0.47
Ground Resolution (m/pixel) 0.018
Adjustment Type Frame
Ground Control Points Involved in Adjustment No
Purpose:
Primary purpose is to quantify floating and submerged aquatic vegetation in the channel.
Survey Date and Time:
Data was collected on 12/5/2023 1015-1230 PST
Imagery Acquisition:
The imagery was collected using a DJI Mavic 2 Pro UAS, operating at 250’ above ground level, along one single flight line following the center line of Paradise Cut from the weir on the San Joaquin River to the confluence with Old River. The field collection was controlled by a DJI Smart Controller running the DJI Pilot app.
Software Processing:
Images were imported into ArcGIS Pro 3.1 using the Ortho Mapping workspace tool, block adjusted, and an Orthomosaic was generated. No external control points were used for this project.
Adjustment summary from ArcGIS Pro:
Number of Adjusted Images 2725
Number of Tie Points 17513992
Number of Solution Points 5648711
Mean Reprojection Error / Sigma Naught (pixel) 0.34 / 0.47
Ground Resolution (m/pixel) 0.018
Adjustment Type Frame
Ground Control Points Involved in Adjustment No
This is an official DWR Image Service, which meets all appropriate requirements of the DWR Spatial Data Standards, specifically the DWR Spatial Data Standards version 3.5, dated September2023.
DWR makes no warranties or guarantees — either expressed or implied — as to the completeness, accuracy, or correctness of the data. DWR neither accepts nor assumes liability arising from or for any incorrect, incomplete, or misleading subject data.
This Image Service was published on 12/7/2023, by the DWR Division of Engineering. Comments, problems, improvements, updates, or suggestions should be forwarded to the official DWR point of contact as available and appropriate at gis@water.ca.gov |
| licenseInfo:
|
public domain |
| catalogPath:
|
|
| title:
|
ParadiseCut_20231205_dom.crf |
| type:
|
Image Service |
| url:
|
https://parcgis.water.ca.gov/arcgisimgpublicmngr/admin/Aerial_Photography/ParadiseCut_20231205/ImageServer |
| tags:
|
["Paradise Cut","Delta","California","orthomosaic","UAV","2023"] |
| culture:
|
en-US |
| name:
|
ParadiseCut_20231205 |
| guid:
|
|
| spatialReference:
|
WGS_1984_UTM_Zone_10N |